ATOS hydraulic check valve - Italy ATOS valve / Plastic solenoid valve / pressure jcb relief valve

ATOS check valve - Italy ATOS valve / solenoid valve / pressure relief valve: ATOS valve in a variety of daily basis on the basis of the industry in the world to use. These valves are highly reliable and extremely reliable. All ATOS valves are also available with coils to fit and other accessories, with the hydraulic industry with over 35 years of experience, we have the knowledge and experience to help you with all your hydraulic needs.

 ATOS DHE Electromagnetic Directional Valve:

ATOS DHE valves are equipped with threaded, high-performance solenoid valve electromagnetic valve. The valve is configured in three or four ways and is available with two or three spool positions. Spools are interchangeable and are available in a wide range of hydraulic configurations. Electromagnets have AC or DC power supply with two different executions and their composition:
§ Integrated manual operation pin wet thread pipe (tube is different from AC and DC power supply).
§ AC and DC coils (see section 5 of the data sheet).
The coils are interchangeable with the same type of power supply or DC, and can be easily replaced without tools. The coil is completely encapsulated with the following temperature classes:
§ For DC coil class H
§ Class F AC coil
Surface Mount ISO 4401 Dimensions 06 (CETOP 3). Maximum flow rate of up to 80 liters / min. Maximum pressure: 350 bar

ATOS DHI Electromagnetic Directional Valve:

The range of ATOS DHI valves has now been replaced by the ATOS DHE range. The DHE range of the solenoid valve replaces the ATOS DHI valve range and is directly replaced. These new valves can also be fitted with coils.
ATOS DHI valve spool type This is usually three or four ways, two or three positions directly operated solenoid valve design hydraulic system work. They are sealed by a wet pressure solenoid valve that can be manually controlled and operated according to the North American standard certification coil. Protection of moving parts, lubrication and oil cushioning. The coil is completely sealed and is easy to replace.
Surface Mount ISO 4401 Dimensions 06 (CETOP 3). maximum. Flow up to 60 liters / min. maximum. Pressure: 350 bar.

ATOS DKE electromagnetic valve:

ATOS DKE valve electromagnetic directional control valves; these are three or four way configurations and are available with two or three spool positions. Spools are interchangeable and are available in a wide range of hydraulic configurations. Electromagnets have AC or DC power supply with two different executions and their composition:
§ Integrated manual operation pin wet thread pipe (tube is different from AC and DC power supply).
§ AC and DC coils (see section 5 of the data sheet).
The coils are interchangeable with the same type of power supply or DC, and can be easily replaced without tools. The coil is completely encapsulated with the following temperature classes:
§ For DC coil class H
§ Class F AC coil
Surface Mount ISO 4401 Dimensions 10 (CETOP 3). Maximum flow up to 150 liters / min. Maximum pressure: 350 bar.

ATOS Explosion-Proof Solenoid:

ATOS ATEX explosion-proof valve is one that can provide the following certification and protection mode, explosion-proof solenoid valve on / off, proportional valve:
Two solenoid groups with gas, vapor and dust on the surface of the environment
§ ATEX 94/9 / EC, Explosion-proof II 2 GD Ex d type IIC T6 / T4 / T3, Explosion-proof tD type A21 IP67 - Class 2, 1,2,21 22
§ IECx safety certification worldwide, Ex d type IIC T6 / T4 / T3, explosion-proof tD type A21 IP67
§ Rostechnadzor Russian certification
A group of tunnels, tunnels or miners
§ ATEX 94/9 / EC: Explosion-proof my M2 Ex d type I trillion
§ IECEx certification: EX D I trillion
The electromagnetic shell is designed to contain a possible explosion that may be caused by the presence of gas within the shell of the gas mixture, thereby avoiding the risk of propagation in the external environment. They are also designed according to the authentication class to avoid self-ignition of the explosive mixture present in the environment to limit the external temperature. These solenoid valves are suitable for use in explosion hazard environments where hydraulic valves are used.

ATOS HM Modular RELIEF (CETOP 3) Valves:

ATOS HM Modular relief valve Two-stage pressure relief valve with balanced lift. The pressure adjustment is done by loosening the lock nut and rotating the screw protected by the cover. Optional models are available via handwheel, not screw adjustment settings. In order to increase the pressure, need to rotate clockwise.
HM = ISO 4401 size 06 interface; maximum flow 35 l / min; maximum pressure up to 350 bar.
The ATOS HM modular safety valve is designed to operate with a hydraulic system with similar lubrication characteristics to hydraulic mineral or synthetic fluids. Modular pressure relief valve Order code / data connection is found on the data sheet.
ATOS HQ Modular Throttle (CETOP 3 Valve)
The ATOS HQ modular throttle valve is flow restrictor and is not compensated and uses a check valve to allow free flow in the opposite direction. The flow adjustment is done by turning the set screws in the normal mode. Optional version of the postgraduate micrometer knobs available upon request.
Clockwise rotation increases throttling (lower pass).
HQ-0 ... = ISO 4401, size 06 interface: up to 25 l / min / U option up to 80 l / min, pressure up to 350 bar
The valve is designed to operate with a hydraulic system with similar lubrication characteristics to hydraulic mineral oil or synthetic fluids.

ATOS HR modular check valve (CETOP 3)

The ATOS HR modular check valve is available from Pike Hydraulics and Pneumatic GmbH throughout the UK for direct delivery or pilot models. We have a variety of ATOS products that have an incredible knowledge when it comes to these products so that we have a very reliable one-stop service for all your hydraulic needs.
Optional versions of the decompression are available on request. HR-0 ... = ISO 4401 size 06 interface: flow up to 60 liters / min, the pressure up to 350 bar. The ATOS HR modular check valve is available in a variety of sizes and configurations with Parker Hydraulic and Pneumatic GmbH, as shown below, by telephone or by e-mail.
These valves are designed to operate with hydraulic systems that have similar lubrication characteristics to hydraulic mineral or synthetic fluids.

ATOS main models: DHE, DHI, DKE, ATEX, HM, HQ, HR